Filter By:
- Bar Ends (2)
- BMX (3)
- Bottom Brackets (44)
- Brakes/Levers/Pads (157)
- Cables (53)
- Cassettes/Freewheels (64)
- Chainrings (73)
- Chains (57)
- Show More Categories
- Cranksets (38)
- Derailleurs (65)
- Forks (11)
- Groups (4)
- Handlebar Grips/Tape (53)
- Handlebars (28)
- Headsets (29)
- Pedals (71)
- Saddles (47)
- Seatposts (26)
- Shift/Brake Combinations (6)
- Shifters (33)
- Shocks (1)
- Stems (37)
- Other (290)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
This BMX quill stem combines a steel rod with an alloy top. The 4-bolt top clamp securely fastens handlebars.
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$0.30
Replacement lower hardware for Rockshox forks.
$0.50
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss 240s Shim Ring
$0.99
Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!
$1.00
Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.
$1.00
Extend housing runs using these double-ended junction end caps.
$1.00
Jagwire's M6 Adjusting Bolt is a metal adjusting barrel that is the correct replacement adjusting barrel for the cable clips/hangers found on many cable brake systems old and new. It makes it easy to tighten/loosen your brakes without tools. Its 6 x 1.0mm threading fits most clips/hangers and it has a lockring for locking your brake adjustment once it's set. You get a pack of 25.
$1.00
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.
$1.50
Basics brake cables provide value on a budget.
- Pre-stretched
- Double ended for compatibility with SRAM/Shimano road and mountain brakes
- Color: Silver
- Diameter: 1.6mm
$1.50
Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.
$1.50
Protection where it's needed; Tube Tops can be placed virtually anywhere cable housing comes into contact with a bicycle frame. Designed to protect a frames finish Tube Tops can also be used to quiet cable slap.
$1.99
Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
$1.99
Problem Solvers has a couple different options for adding cable housing or brake hose guides to your bike. Choose from the adhesive stick-on option or the guide that mounts to existing housing stops.
$1.99
- Steel cable noodle with alloy end caps
- Includes plastic liner
$2.00
Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
$2.50
380mm long, single-ended straddle for mountain cantilever brakes
$2.50
Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel.
- KEB-SL - linear strand, Kevlar reinforced, compressionless brake housing with Slick-Lube liner
- Perfect for full-housing, high-performance bikes with mechanical disc or rim brakes
- 20 black alloy lined end caps, 10 black POP end caps included
$2.50
Frame-mounted barrel adjusters allow cable tension to be easily fine tuned.
- Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch
- Bag of 10
$2.50 - $6.99
- Allows quick chain removal without tools
- MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
- MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
- MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
- MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
- MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
- MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
- MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$2.95
Sport shift housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade.
- Slick-Lube lined housing reduces friction for faster cable movement and better shifting performance
- Linear strand construction for compressionless performance
- Appropriate for Teflon coated cables as well as steel and galvanized
- 4.0mm outer diameter solid colors; 4.5mm OD braided colors
- Length: 10m
$2.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$2.99
- Replacement chain pin for 7- and 8-speed Shimano chains
- 3 replacement pins per pack
$2.99
- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes five (5) 1-1/8" x 5mm spacers
$3.00
Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.
$3.00
Complete remotes and remote components for KS dropper posts.
$3.95
Bolts, clamps and washers for Thomson Seatposts and Seat Clamps.
- Sold individually, includes bolt, washer and nut
$3.99
Basics brake cable and housing set provide replacement level quality in an easy-to-use double ended package.
- Non-extruded galvanized inner cable
- Compatible with Mountain and Road for Shimano/SRAM
- Lead-free PVC housing
- Enough cable and housing for one brake
- Black
$3.99
Chrome plated heat treated bolt
- Forged steel conical wedge
- For 1-inch steer tubes
$3.99
- Preload collar for adjusting tension on bottom bracket bearings
- For Race Face 30mm Cinch System cranks only
$3.99
- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette
- Range: 4mm
- Color: Silver
$4.00
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$4.00
Bolts, clamps and washers for Thomson Seatposts and Seat Clamps.
- Sold individually, includes bolt, washer and nut
$4.25 - $24.99
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
$4.50
Tools for repair and maintenance of RockShox Reverb suspension seatposts.
- Specific to RockShox Reverb post
$4.99 - $9.99
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.
$4.99
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.
$4.99
- Binder bolt
- M6 x 45mm chromoly bolt
- 13mm CNC alloy nut
- Length: 45mm
$5.00
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Cassette Seal: Fits all ratchet drive hubs
$5.00
Brass hose insert for Hope hydraulic disc brakes.
$5.00
Jagwire's flexible shift housing is used for the rear housing segment with Shimano Shadow-type road rear derailleurs to give optimum shifting performance and the flexibility needed for wheel installation and removal.
- For use with Shimano Shadow type road rear derailleurs, such as RD-R9100, RD-R8000, and RD-R7000.
- 4mm low-compression CGX-SL housing construction.
- Includes 10x sealed end caps and 10x 4mm/4mm housing connectors
$5.00 - $9.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables.
- Slick cables are die-extruded for smooth operation
- Pre-stretched
- Double-ended SRAM/Shimano mountain and road compatible cable ends
- Stainless steel construction resists corrosion
- Double Ended: Yes
- Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain
- Defined Color: Silver
- Quantity Included: 1
$5.00
Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.
$5.00
Power Links provide tool free chain assembly.
- 8-speed width: 7.1mm
- 9-speed width: 6.8mm
- Chain Compatibility: SRAM
- Reusable: Yes
Page 1 of 20
Next page