Other

All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts. - Sold as a pair; two bolts and two springs - M4x0.7mm thread - Length: 45mm

Snap-on brake cable guides for bikes that don't have any. - Steel cable housing guide for 1-1/8" top tubes - Snaps on; no bolts - Set of 3 clamps

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors

Our clever Splits clamp attaches our Triggy directly to the handlebar. Special plastic compounds and production process allow flexibility within the clamp to have it installed, while grips and brakes are still on the bars. Just snap it on! A heat treated inlay made of stainless steel with a laser engraved finish, give it a unique and classy look. By the way: SRAM shifter triggers can also also be attached to the handlebars using our Splits clamp.

Triggy Alpha - The name speaks for itself - the new pack leader of dropper remotes. Since the beginning our Triggy has proven to be a favourite among many many pro riders and testers but with Triggy Alpha we have now set the bar even higher and we confidently say: There is no better remote on the market. The video is pretty much explaining very well what makes Triggy Alpha stand out amongst others: - Ball bearing on the paddle - Angle-adjustable paddle - Black anodized aluminum body and paddle with laser engraved finish - 2 available paddle lengths for crisp or soft dropper engagement - 2 mounting holes - Integrated cable tensioner - Direct mount for almost any brake available (see mounting options) - New cable clamping for universal dropper compatibility - Extremely low weight: 32g/34g (short/long) - Maximum cable pull: 11 mm The short version mimics our proven original Triggy paddle geometry. The long variant features a 7mm longer paddle and reduces the required forces by about 15%. Triggy Alpha is compatible with any commonly available aftermarket cable-actuated dropper post on the market. 1 set Triggy Alpha includes: - 1x Triggy Alpha remote (short or long) - 1x shift cable - 1x wire endcap - 1x BikeYoke Splits Clamp or I-Spec Adapter (optional)

Desgined to increase the stiffness of the EPS front derailleur on frames with flexible braze-on mounts, especially frames with carbon fiber mounts. - Required for use on carbon frames with carbon front derailluer braze on mounts

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Durable steel construction

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Lightweight aluminum construction

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Replacement seals for servicing Cane Creek rear shocks.

Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets. - Cane Creek Hellbender Bearing, 52mm SHIS

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 15mm - Outer Diameter: 24mm - Width: 5mm

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 15mm - Outer Diameter: 28mm - Width: 7mm

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 30mm - Outer Diameter: 42mm - Width: 7mm

Chris King bottom bracket Fit Kits for DUB cranks are used with Chris King bottom brackets to ensure that cranks mate perfectly with bearings, extend product life, and reduce the potential for noise. Fit Kits will also allow you to use one bottom bracket with a wide array of cranks, if you happen to change you cranks in the future.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Cassette Seal: Fits all ratchet drive hubs

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 15.4mm, for ratchet

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240 Disc Ring Nut

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Service Kit - 3-Pawl

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss 370/Onyx Service Kit: 2 pawls, spring and grease

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 1526 Bearing for Rear Driveside Spline 1200, 2nd Generation Spline1501 and Dicut Disc Wheels

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6802 Bearing

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6803 Bearing

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6902 Bearing

- Adapts 35mm CenterLock rotor-mount splines to accept an International Standard 6-bolt, 44mm BCD rotor - Does not fit Saint-style 47mm Oversize CenterLock, and will not work with thicker, aluminum-carrier Hope 2005+ style Mono-series rotors - Designed for up to 210mm rotors - Tabs in adapter mate to (6) M5 rotor bolt holes and is secured by CenterLock-style lockring, sandwiching 6-bolt rotor to adapter - Lockring requires a 16-notch external bearing bottom bracket wrench - CL-IS adapter is black and lockring is black with silver etching: 29g

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Star Ratchet Kit - 24T